超音波溶接機で構成された超音波システムの種類

Feb 16, 2022

(1) Transducer The acoustic system used in ultrasonic plastic welding machine includes three parts: 

1 driving part 

2 fixed part 

3 working part. 

In the above three parts, the driver is the core, generally adopts bolt clamping longitudinal vibration transducer, the half wave vertical oscillator with a quarter of the wavelength of longitudinal vibrator, half the wavelength of longitudinal vibration and the half wave shaped device connected to form a full wavelength plastic welding transducer, and the quarter wave vertical oscillator with quarter wave shaped device is linked together, Form a half-wavelength transducer. 


(2)ツールヘッドは、近接場溶接であろうと透過溶接であろうと、溶接対象ごとに異なるツールヘッドを必要とします。溶接端面の最大振幅を達成できるのは、半波長のツールヘッドだけです。 振幅増幅ありとなしの2種類の工具ヘッドがあります。 プラスチック溶接機の音響システムツールヘッドは通常アルミニウム合金でできており、その端面は硬質合金でメッキされています。 パワーが大きい場合もチタン合金製で、アルミニウム合金の2倍以上の疲労強度があります。 超音波プラスチック溶接機は、さまざまな場面や溶接材料を使用しているため、溶接サイズは同じではなく、その仕様はすべて種類です。 その出力電力は、数十ワットの手動溶接機から数キロワットのメインフレームまでの範囲であり、周波数は一般に15KHzから40KHzの範囲です。

04101623_r5HWrjWdzk